News

  • 27/05/13: ALTERNATING TEMPERATURE TECHNOLOGY

    1) Benefits of ATT for injection moulding processes

    Variotherm mould temperature control has a variety of benefits that positively affect processes, part surfaces,part strength and the cost-efficiency of production processes.

    ATT

    • prolongs the holding pressure even in areas that are away from the gate and helps reduce injection pressure and clamping force,

    • decreases internal stress during compression moulding of thick-wall optical components,

    • enhances surface properties such as self-cleaning or antireflection coating, the reproduction of microstructures and nanostructures as well as the production of particularly smooth and high-grade glossy surfaces with piano effect,

    • introduces a better homogeneity of glass fibres in technical parts,

    • increases the welding time for melt fronts and prevents weld lines,

    • reduces the risk of warpage caused by shrinkage and improves the dimensional stability and consistency of injection moulded parts and

    • cuts cycle times thanks to longer wall contact of melt agglomerations with the result of an intensified cooling action.

     

    2) Benefits of ATT for processing fibre-reinforced

    composites

    Variotherm mould temperature control also has a variety of benefits that positively affect the process, part stability, surface quality and cost-efficiency of thermoset processing and composite structure production. It cuts cycle times by optimizing the process stages thanks to faster curing and subsequent cooling. wall contact of melt agglomerations with the result of an intensified cooling action.

     

    FOR MORE INFORMATION: http://www.pme.be/product/en/P141

     

     

  • 27 and 28/03/2013 : PME present at the SOLIDS 2013 exhibition

    PME will be present on the "SOLIDS 2013" exhibition on the 27th and 28th of March 1013 at Antwerp (BE)

     

  • 16/11/2012 : MOVACOLOR wins the FD Gouden Gazelle Award

    Movacolor B.V. proud to win the FD Gouden Gazelle Award

     

    With a growth in turnover of 106 percent over the years 2009, 2010 and 2011 Movacolor B.V. won the FD Golden Gazelle Award. This is a price awarded to the fastest growing medium-sized company of the Frisian province. Initiator of the prestigious FD Golden Gazelle award is newspaper  Het Financieele Dagblad, the Financial Times of the Netherlands. 

     

    “It is a great compliment for our employees and our distributors worldwide”, says managing director Gerhard Dersjant. “It shows that the quality of the gravimetric and volumetric dosing machines we develop and produce is recognized worldwide. “

     

    Movacolor B.V. keeps focusing on the development of dosing units  who eccel in terms of accuracy and stability in order to realize large savings on masterbatch, powder, liquid or regrind colorant additives. “Together with our customers, distributors, suppliers and employees we will keep growing. This is just the beginning”, says Dersjant.

     

     

     

  • 01/10/2012 : New Sales Engineer for Belgium and Luxemburg

    Jelle Malfroid joins the PME Sales Team in Belgium and Luxemburg from the 1st of october 2012 onwards. 

     

  • 26 en 27/09/2012 - PME present on the Kunststoffen 2012 exhibition

    PME will be present on the "Kunststoffen 2012" exhibition on the 26th and 27th of september 2012 at Veldhoven (NL)

     

  • 31/03/2012 PME BV - Independant company for the Dutch Market

    PME BV is founded and will operate as an independant sales company starting the 2nd Quarter of 2012 after a break-in period under the wings of PME NV. Further expansion will be made in the near future. 

     

  • 08/03/2012 - PME represents the WEIMA shredders for the Plastics Industry in BENELUX

    PME represents from 08/03/2012 onwards the Shredders and Grinders for the Plastics Industry from WEIMA in Belgium, The Netherlands and Luxemburg. Fernand Taverniers (BELUX) and Mark Andringa (NL) are at your disposal for any further information you might require.

     

     

  • 09/05/2012 en 10/05/2012 - OPEN HOUSE EQUIPPLAST

    EQUIPPLAST, the knowledge centre for the plastics industry in the BENELUX , organises 2 "OPEN HOUSE" days in the Brabant Hall at 's Hertogenbosch (NL) on the 9th and 10th of May 2012. More info on www.equipplast.be

     

  • 14/01/2012 - MOVACOLOR Touch screen controller for MCBALANCE

    The operation of the MC MOVACOLOR BALANCE is now even easier with the optional Touch screen controller. Never has a gravimetric coulouring unit been so intuitive and easy to use!

     

  • 15/12/2011 - PME represents GAMMA MECCHANICA

    PME represents the regranulation lines from GAMMA MECCANICA in Belgium, The Netherlands and Luxemburg. Fernand Taverniers (BENELUX) is at your disposal for any further information you might require.

     

  • 15/12/2011 - PME sales program expanded with LABORSAVE

    PME represents from 15/12/2011 onwards the bag emptying solutions from LABORSAVE in Belgium, The Netherlands and Luxemburg. Fernand Taverniers (BELUX) and John Liebregts (NL) are at your disposal for any further information you might require.

     

  • 01/12/2011 - Production upscaling for PME

    Customised solutions are becoming more and more an "added value". The PME production capacity has been recently upscaled with a new MIG / TIG welding and construction station so that we are able to match the needs of our customers. 

     

  • 28 en 29/09/2011 - PME present on the Kunststoffen 2011 exhibition

    PME will be present on the "Kunststoffen 2011" exhibition on the 28th and 29th of september 2011 at Veldhoven (NL)

     

  • 12/09/2011 - New Engineer for the BENELUX

    Dirk Poriau joins the engineering team of PME starting 12th of september 2011.

     

  • 01/07/2011 - New Production Staff member for the BENELUX

    Luc Engerie joins the Production team at PME starting on 1st of july 2011. His experience in steel fabrication and construction will certainly be an added value that will be highly appreceated. 

     

  • 11/05/2011 en 12/05/2011 - OPEN HOUSE EQUIPPLAST

    EQUIPPLAST, the knowledge centre for the plastics industry in the BENELUX , organises 2 "OPEN HOUSE" days in the Brabant Hall at Leuven (BE) on the 11th and 12th of May 2011. More info on www.equipplast.be

     

     

  • 18/04/2011 - EAS representation for the BENELUX

    PME represents the EAS Mould & Die change systems in Belgium, The Netherlands and Luxemburg. 

     

     

  • 01/04/2011 - New sales engineer for the Netherlands

    Gerard Nijkamp joins the PME Sales Team in the Netherlands from the 1st of april 2011 onwards. His extensive experience in conveying and drying systems will be a additional value that customers surely will apreciate. 

     

  • 01/02/2011 - MOVACOLOR representation for the BENELUX

    PME represents from 01/02/2011 onwards the well known dosing systems from MOVACOLOR in Belgium, The Netherlands and Luxemburg. 

     

     

  • 15/11/2010 - New Field Service Engineer

    Peter Cocquyt becomes member of te PME Service and Maintenance group in BENELUX from the 15th of november 2011 onwards.

     

  • 27/10 to 3/11/2010 - PME attending K 2010 - Düsseldorf

    PME will be present on the "K 2010" exhibition at Düsseldorf (DE). The complete Sales staff is at your disposal on the booths of our different suppliers. 

     

     

  • 29 en 30/09/2010 - PME present on the Kunststoffen 2011 exhibition

    PME will be present on the "Kunststoffen 2010" exhibition on the 29th and 30th of september 2010 at Veldhoven (NL)

     

     

  • 10/09/2010 - New Housestyle for PME

    PME has adopted a totally new housestyle and Logo as from the 10th of september 2010

     

  • 01/09/2010 - New Field Service Engineer for the NETHERLANDS

    Martin Van Zuilekom joins our Technical Staff for the Netherlands as from 01/09/2010

     

  • 01/09/2010 - New sales engineer for the NETHERLANDS

    Mark Andringa joins the PME Sales Team in the Netherlands from the 1st of september 2010 onwards. His extensive experience in peripheral equipment for the plastics industry will be a additional value that customers surely will apreciate. 

     

     

  • 01/09/2010 - PLASTIC SYSTEMS representation for the NETHERLANDS

    PME represents from 01/09/2010 onwards PLASTIC SYSTEMS in the Netherlands.  PS is well known as a OEM supplier. Drying- and conveying systems are the core buisiness of PLASTIC SYSTEMS.

     

  • 01/07/2010 - TRIA representation in the NETHERLANDS

    PME represents from 01/07/2010 onwards TRIA in the Netherlands. TRIA is well known as a supplier for high quality grinders for the plastics and recycling industry.

     

  • 01/07/2010 - MAGUIRE representation for the NETHERLANDS

    PME represents from 01/07/2010 onwards MAGUIRE in Belgium and Luxemburg. MAGUIRE is well known as a supplier for gravimetric Batch blenders, Vacuum drying systems and other innovative peripheral equipment.

     

     

  • 01/07/2010 - HAHN AUTOMATION representation for the BENELUX

    PME represents from 01/07/2010 onwards HAHN AUTOMATION in Belgium, the Netherlands  and Luxemburg. HAHN AUTOMATION is well known as a High-End Automation Company, and through Aquisition of REMAK and GHS, a major player on the 3-axis CNC robots and sprue Picker market. 

     

  • 16/06/2010 - OPEN HOUSE PME

    PME invites you to discover the new and improved sales programme on this 3-day open-house sales meeting. 

     

  • 01/06/2010 - New sales engineer for the NETHERLANDS

    John Liebregts joins the PME Sales Team in the Netherlands from the 1st of June 201O onwards. His extensive experience in automation systems will be a additional value that customers surely will apreciate. 

     

     

  • 01/02/2010 - PME represents PLASTIC SYSTEMS for the BELUX market

    PME represents from 01/02/2010 onwards PLASTIC SYSTEMS in Belgium and Luxemburg. PS is well known as a OEM supplier. Drying- and conveying systems are the core buisiness of PLASTIC SYSTEMS